C01B-RS Steel Lower Deck
Made of 1.2mm hardened spring steel, the chassis combines previously unmatched lower center of gravity and excellent flex characteristics.
Extensive refinement of the production process enabled the required chassis flatness and hardness to be achieved.
The result is an incredibly long-lasting chassis that will outlast its carbon and aluminium counterparts due to being more wear resistant and able to retain adequate flatness for longer.
INFO:
This chassis requires specifically machined screws (SS-SC).
contains:
1pcs C01B-RS
Flatness Compliance Notice:
Every chassis we produce is individually tested to ensure it meets our strict flatness tolerances (≤ 0.4mm).
Measurements are conducted on a certified flat surface under the chassis own weight, using calibrated probes.
If a chassis meets these specifications, it is considered within tolerance and cannot be accepted as defective.
Claims based on unverified methods or improper testing conditions will not be considered.
Our standards are clear, and every chassis leaving our facility meets them.
07.07.2025 - C01B-RS running change - P12X pin hole has been removed from C01B-RS to improve durability under hard impact.
This change implies a slight modification where P12X pin must be shaved off prior to installation. See SCC Instruction Manual V3
